Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Houston Homeowners Choose KraftMaid Construction
We provide independent Kraftmaid repair in Houston, including cabinet installation, refacing, and repair service throughout the area. Our crews work hands-on with Vantage, Durham, Lexington, and Benton door families every week, and we bring the kind of brand-specific knowledge that comes from hundreds of Gulf Coast kitchens, not a brochure. Call (254) 527-5340 for a free estimate on your KraftMaid project.
Here’s the thing about KraftMaid cabinetry in Houston: it holds up remarkably well when installed correctly and ventilated properly. But our clay-heavy soil shifts, our summers push 100 degrees with 90% humidity, and older homes with pier-and-beam foundations flex in ways that stress cabinet boxes, door alignment, and drawer hardware. We understand how KraftMaid cabinets behave in those conditions because we’ve been repairing and installing them across Meyerland, Kingwood, and the inner loop for years.
Let’s set one thing straight up front: Penhallow Remodeling Houston is an independent contractor. We are not authorized by KraftMaid, we don’t claim to be, and we won’t pretend otherwise. What we offer is deeper practical experience with these specific cabinet lines than a typical General Contractor brings to the table. If you’ve got a KraftMaid kitchen that’s sagging, peeling, or coming loose at the corners, we can tell you what’s actually happening and whether it’s worth fixing.
Why Trust Penhallow Remodeling Houston for Your KraftMaid Construction?
Trevor Nash leads our Houston team, and he’s been swinging a hammer long enough to know that cabinet work fails in predictable ways. He studied construction technology at Los Angeles Trade-Technical College, learned early that a straight wall is harder to build than it looks, and has spent enough years in Houston to understand why the soil conditions near Meyerland matter before you hang a single upper cabinet on an exterior wall. When he walks a KraftMaid kitchen, he looks at the box construction first, the door alignment second, and the hardware third. That’s the order that tells you whether a kitchen is worth refacing or needs a full replacement.
Our technicians are background-checked, uniformed, and trained specifically on KraftMaid construction details: the five-piece drawer front on Lexington series, the full-overlay flat panel profile on Vantage, the raised center panel on Durham. We know which hinge cup screws back out of composite stiles on partial-overlay models, and we know which drawer box corner staples pull loose first in a non-climate-controlled Houston garage. That’s not manufacturer training. That’s field experience.
Every job gets a written price before work starts. That’s a Kingswell standard since 2004, and it holds on KraftMaid work just like any other project. You get a written number, a written guarantee, and our 365-Day Done Right Promise: if the work fails inside a year, we come back and fix it at no charge. That promise is in writing on every project.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in Houston
KraftMaid builds a solid cabinet, but Houston’s climate exposes real failure points. Here are the issues we see most often:
- Wobbly or sagging drawers. Older KraftMaid drawer boxes are stapled at the corners, and Houston’s humidity cycles cause the wood to expand and contract. Give it five or ten summers in a non-climate-controlled space, and those staples start pulling loose. We see this constantly in garage cabinetry and in kitchens where the HVAC gets shut down during vacation season. The fix is usually corner reinforcement plus new drawer guides, which costs a fraction of a drawer-box replacement.
- Peeling or delaminating thermo-foil doors. The older Vantage line used a thermo-foil laminate that, frankly, doesn’t love heat and moisture cycling. We see peeling on doors adjacent to dishwasher vents, above range hoods, and near HVAC supply registers. Houston’s humidity accelerates the failure. The door itself typically can’t be saved once the foil starts separating. The fix is a reface with a different door family, like Lexington in maple, which gives you a painted or stained finish that won’t peel.
- Sagging shelves in wall cabinets. KraftMaid wall cabinets rely on shelf cleats for support. When those cleats are set too far apart, or when a homeowner loads up a cabinet over the stove with cast-iron cookware, the shelf bows and eventually pulls the cleat screws loose. We see this across Durham and Benton installations especially. The repair is straightforward: reinforce the cleat, add support where the span is too wide, and re-check the shelf rating.
- Crooked doors that rub the face frame. On partial-overlay KraftMaid models, the hinge cups seat into composite stiles. Houston’s humidity softens the composite over time, the hinge screws back out, and the door drops. You end up with doors that drag on the frame or won’t close square. New concealed hinges with longer screws into the solid frame usually fixes it. On some older series, we’ll switch to a quality aftermarket hinge that seats deeper.
- Failed soft-close mechanisms. KraftMaid’s soft-close drawer glides and door dampers wear out. It’s a simple mechanical failure. We stock replacements that match the original mounting pattern, or upgrade to an aftermarket soft-close that fits the existing boxes when the original parts are discontinued.
KraftMaid Parts & Our Repair-vs-Replace Approach
We use genuine KraftMaid hardware when it matters: hinges, drawer guides, shelf clips, and mounting brackets where the original finish and alignment need to match. For older or discontinued series where OEM lead times run weeks, we switch to high-quality aftermarket concealed hinges and soft-close adapters that seat correctly and last.
On the repair-vs-replace question, we’re honest about what makes sense. If the box construction is sound but the doors are tired, refacing keeps your existing KraftMaid cabinets and saves you thousands compared to a full tear-out. Our crew refaced a 1999 KraftMaid Benton kitchen in Meyerland where the previous homeowner had replaced only the island doors, a project that shows the kind of Katy Kraftmaid service homeowners can expect from our attention to detail. We measured every face frame to within 1/16 inch, re-clad all perimeter bases and walls with new Lexington Shaker doors and drawer fronts in maple, reinforced the boxes where shelf cleats had pulled away, and installed Blum soft-close glides and concealed hinges. The result looked like a full cabinet replacement and cost roughly $8,000 less than tearing out the boxes. If your KraftMaid boxes are square and solid, refacing is usually the smarter play. If the boxes are water-damaged or the framing has moved, we’ll tell you that too. Call (254) 527-5340 for a straight read on your cabinets.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We come out, open every door and drawer, check hinge seating, drawer-guide wear, shelf cleat placement, and box corner integrity. For KraftMaid specifically, we look at the door family construction: full-overlay Vantage doors wear differently than Shaker-style Lexington doors.
- 2
Repair or install. We write the scope and the price. You approve it before we pull a single tool. On refacing work, we re-measure every face frame and order doors and fronts to 1/16-inch tolerance. On repairs, we use OEM or aftermarket parts appropriate to the series and year.
- 3
Test. Every drawer gets opened and closed twenty times. Every door gets checked for gap consistency and hinge alignment. We check soft-close function under real load, not just empty.
- 4
Warranty. You get a written guarantee, including a free return visit if a repair fails within the guarantee period. No service call fee, no re-inspection charge. That’s the 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Houston
We work on the full range of KraftMaid door families we encounter in Houston homes. Vantage (full-overlay flat panel) shows up in early-2000s kitchens and is the line we most often reface due to thermo-foil peeling. Durham raised center panel doors hold their finish well in humid conditions but are prone to hinge-cup loosening on partial-overlay frames. Lexington is the Shaker-style, five-piece drawer front line we install most on refaces and full remodels. Benton recessed-panel doors, available in multiple wood species, often need shelf-clear reinforcement and drawer-box corner work after years of service.
We stock common hardware locally: concealed hinges, soft-close adapters, drawer guides, shelf clips, and mounting brackets. Custom doors and fronts are ordered per job to match your existing finish and door family.
We Also Service These Brands
KraftMaid is a major part of our kitchen work, but we’re not a single-brand shop. We install and service Cambria and Silestone countertops alongside KraftMaid cabinetry, and we work with Kohler and Toto fixtures in kitchen and bath projects. If your kitchen involves multiple brands, we handle the coordination.
FAQs – KraftMaid Construction Service in Houston
No. We are an independent contractor and we don’t hold any manufacturer authorization from KraftMaid. Your manufacturer warranty remains with KraftMaid. Our workmanship warranty is separate and in writing.
Yes. We match the door family and finish as closely as the current KraftMaid catalog allows. If you have Lexington Shaker doors in maple and need to reface only the perimeter, we measure every face frame and order matching doors and drawer fronts to 1/16-inch tolerance. The finish won’t be perfectly identical to 20-year-old sun-faded doors, but it’s close enough that only a cabinetmaker would notice. Call (254) 527-5340 and we’ll tell you exactly what’s matchable before you spend a dollar.
Thermo-foil delamination happens when heat and moisture cycling breaks the adhesive bond between the foil and the substrate. We see it most on older Vantage doors near dishwashers, range hoods, and HVAC vents in Houston’s humid climate. Once the foil starts lifting, the door can’t be reliably re-bonded. The fix is replacing the doors, usually through a reface with a painted or stained wood door family like Lexington. It costs less than a full replacement and eliminates the peeling problem permanently.
It depends on the box construction and the foundation’s condition. If the KraftMaid boxes are square, the shelves sit level, and the corner joints are intact, refacing is almost always the better value. In Houston, we also check for foundation movement that has pulled wall cabinets out of alignment, because new doors won’t fix a box that’s racked. If the framing is sound, refacing saves thousands. If water damage or structural movement has compromised the boxes, we’ll tell you replacement is the honest call. Most of the KraftMaid kitchens we see in Meyerland and Kingwood with 1990s and early-2000s builds are good refacing candidates, and we bring the same expertise to KraftMaid Construction in The Woodlands, TX.
Two things cause this in Houston. First, the original drawer guides wear out, especially soft-close mechanisms that have cycled thousands of times. Second, the drawer box corners, which are stapled on older KraftMaid builds, pull loose as humidity cycles expand and contract the wood. If the box is intact but the guide is worn, replacing the guides is a $100 to $300 fix per drawer depending on the hardware. If the box corners have failed, we reinforce them with mechanical fasteners and re-set the guides. It’s worth fixing if the boxes aren’t water-damaged. Call (254) 527-5340 and describe what you’re seeing; we’ll give you a straight read before we schedule anything.
KraftMaid cabinet installation and refacing in Houston typically runs $4,000 to $13,000. Kitchen design and layout work runs $2,000 to $6,500. A full kitchen remodel with KraftMaid cabinets and countertops runs $14,000 to $45,000. Your exact number depends on door family, finish, box condition, and whether we’re refacing or replacing. Estimates are free.
| Service | Price Range in Houston |
|---|---|
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Kitchen Design & Layout | $2,000 – $6,500 |
| Cabinets & Countertops (Full Kitchen) | $14,000 – $45,000 |
Book Your KraftMaid Service in Houston, TX
If you have KraftMaid cabinets that need attention, call (254) 527-5340. Trevor and the team at Penhallow Remodeling Houston will give you a written price before any work starts, and we’ll stand behind the work with a written guarantee.
Written by Trevor Nash, Owner at Penhallow Remodeling Houston, serving Houston since the Kingswell standard began in 2004.
