







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Kitchen Remodeling: The Houston Owner’s Guide
If you’re looking at a Cover-brand kitchen remodel in Houston that’s showing its age, we install and service Cover-compatible kitchen remodeling work with typical project costs running $14,000 to $45,000 depending on cabinet line, countertop material, and layout changes. Most Houston homeowners call us because something specific has failed: drawer slides that bind, cabinet boxes pulling away from the wall, or a countertop seam that’s opened up after years of Houston humidity. You don’t need a full gut-job to fix what’s actually broken, and we’ll tell you that straight before we quote anything.
We’re an independent Houston remodeling company, not affiliated with Cover or its parent brand. But we work on Cover kitchens regularly, and we know how they’re put together better than most.
Key takeaways:
- Cover kitchen remodeling repairs in Houston typically run $14,000 – $45,000 for a full project, but targeted fixes are smaller.
- Most Cover kitchen failures we see are cabinet hardware, hinge wear, or countertop seam separation from Houston’s moisture swings.
- We give you a written price before work starts, and the number on day one is the number on the invoice.
- Every job carries our 365-Day Done Right Promise in writing.
Which Cover Models This Applies To

Cover kitchen packages vary by era and series, and the compatibility question is the first thing we sort out on a call. Cover kitchens built in the last 15 years tend to use frameless cabinet construction (also called full-access, meaning the door covers the entire cabinet face with no center stile). Earlier Cover-style installs often used face-frame cabinets, which changes how hinges mount and what replacement hardware works. If you can open a cabinet door and look at the inside edge, that tells you most of what we need to know.
For countertops, Cover kitchens in Houston commonly shipped with either laminate, solid surface, or quartz depending on the package tier. The countertop material determines whether a seam can be re-bonded or whether you’re looking at slab replacement. We stock replacement hardware for KraftMaid and Wellborn cabinet lines, and we work with Cambria and Silestone for countertop repairs and replacements, since those are the brands we see most in Houston’s Cover-era kitchens.
One Houston-specific note: cabinet boxes in older Cover kitchens sometimes pull away from the wall because the original installers anchored into drywall instead of studs, and Houston’s clay soil means framing shifts more than people expect. We check stud anchoring on every cabinet repair quote.
Styles & brands we work with







Signs Your Cover Kitchen Remodeling Is Failing
- Drawers that catch or bind on the track. This usually means the drawer glide has worn or a screw has loosened. In Houston, humidity can swell the drawer box slightly, making a marginal glide feel completely shot. Sometimes it’s a $40 glide replacement, sometimes the drawer box itself has split.
- Cabinet doors that won’t stay closed or hang crooked. This is typically worn-out hinge hardware or a stripped hinge screw hole. We see this constantly on Cover kitchens with soft-close hinges that were never adjusted after the house settled.
- Countertop seams that have opened or chipped. Houston’s temperature swings between air-conditioned interiors and 95-degree afternoons stress every seam. Quartz and solid surface seams can sometimes be re-bonded; laminate that’s peeling at the edge is usually a resurfacing or replacement call.
- Cabinet boxes pulling away from the wall. This is the one that needs attention sooner rather than later, because a fully detached upper cabinet is a genuine safety hazard. If you can see daylight behind your upper cabinets or the box moves when you press on it, call us before it gets worse.
- Soft-close mechanisms that slam. The damper inside a soft-close hinge wears out, and many homeowners don’t realize it’s a replaceable part rather than a whole-cabinet problem. We replace these in minutes.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Houston, a full Cover kitchen remodel runs $14,000 to $45,000. That range covers entry-level cabinet refacing with laminate counters at the low end, through new KraftMaid or Wellborn cabinetry, quartz from Cambria or Silestone, a tile backsplash, and layout adjustments at the high end. Cabinet installation alone runs $4,000 – $13,000, countertops $2,000 – $6,500, backsplash $800 – $2,500, and an island $3,000 – $10,000 depending on size and material.
What drives the number up: changing the footprint (moving plumbing or gas lines), choosing full-custom cabinet sizing, upgrading to stone that needs heavier countertop support, and whether your existing drywall and flooring survive demo or need replacement. What drives it down: keeping the layout as-is, refacing instead of full replacement, and selecting stock cabinet sizes.
Every quote includes parts, labor, cleanup, and the written guarantee. If a drawer glide fails or a seam opens within the guarantee period, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s in writing on every project.
DIY or Call Us?
Some of this is genuinely doable for a homeowner with a screwdriver: tightening a loose hinge, adjusting a soft-close damper, replacing a drawer glide. If you’d rather do that yourself, call us anyway and we’ll tell you the part number to buy. We don’t gatekeep basic hardware advice.
Where DIY goes wrong is when the cabinet box is separating from the wall, when countertop seams need re-bonding (the adhesives and clamping are specific and unforgiving), or when you’re dealing with heavy stone. A slipping quartz countertop can seriously injure someone, and a falling upper cabinet is a trip to the ER. That’s the line we draw: if it’s anchored, load-bearing, or heavy enough to hurt you, call a professional. For anything in that category, call us at (254) 527-5340 and we’ll get you a written number before we touch anything.
FAQs

A well-built Cover kitchen in Houston should give you 20 to 30 years on cabinets and 15 to 25 years on quartz countertops, assuming it was installed correctly and anchored to studs. Houston’s humidity and clay-soil movement are the two things that shorten that lifespan. We’ve seen cabinet boxes fail in under 10 years when they weren’t properly anchored. If you’re not sure what you’ve got, call (254) 527-5340 and we’ll take a look at it.
Yes, and we’d rather repair what’s fixable than sell you a full remodel you don’t need. Cabinet hardware, drawer glides, hinge replacement, and even cabinet box re-anchoring are all repairs we do regularly. Countertop seam work is sometimes repairable, sometimes not, depending on the material and how far the damage goes. We’ll walk you through the honest fix-versus-replace call before we quote anything.
A hardware-level repair (drawer glides, hinges, soft-close dampers) is done in one visit, usually a few hours. A full kitchen remodel in Houston takes 4 to 8 weeks depending on scope, permits, and material lead times. We give you a written timeline with the written price, so you know what the sequence looks like before demo day.
We stock common cabinet hardware (hinges, glides, dampers, pulls) for KraftMaid and Wellborn lines, and we can source replacement doors, drawer boxes, and cabinet components quickly if it’s beyond what we carry. For countertops, we measure and order Cambria or Silestone slabs, which typically arrive within one to two weeks in the Houston market. If you call and tell us what’s broken, we’ll let you know on the spot whether it’s something we have on hand.
No. The written price we give you before work starts is the number on the invoice, unless you ask for something extra along the way. If we open a wall and find something unexpected, we stop, show you what we found, and give you a new written number before we do any additional work. That’s how we operate under The Kingswell Way, and it’s been that way since 2004.
Yes. In Houston, kitchen remodels that touch electrical, plumbing, or structural work require permits, and we handle all of that. The permitting process is part of your written timeline and your written price. No surprise line items, no “we’ll handle it under the table.” If it needs a permit, we pull it, and the inspection gets scheduled before we leave.
Written by Trevor Nash, Owner, Penhallow Remodeling Houston at Penhallow Remodeling Houston, serving Houston and nearby areas.


