







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Kitchen Remodeling: The Houston Owner’s Guide
Boral kitchen remodeling in Houston typically runs $14,000 – $45,000 installed, and if you have a failing Boral surface or component, we can match it and install the replacement, usually within the same week. Most homeowners discover a problem when a Boral tile develops a hairline crack that wasn’t there last month, or a decorative trim piece pops loose after Houston’s humidity cycles. We’re Penhallow Remodeling Houston, an independent general contractor, and we’re not affiliated with Boral, but we work with their product lines regularly and know what fails first, what’s worth repairing, and what needs a full replacement. Call us at (254) 527-5340 and we’ll give you a straight answer on what you’re dealing with.
Which Boral Models This Applies To

Boral manufactures several kitchen-relevant product lines, and the compatibility question usually depends on whether you’re working with Boral tile, Boral trim and moulding, or Boral stone veneer. Here’s the part most Houston owners miss: Boral tile is categorized by a PEI wear rating and water absorption class, and a tile rated for wall use will crack within a year if installed as a kitchen floor. We always check the marking on the back of the tile or the original box label. The code tells you the series, the batch, and whether it’s rated for floor traffic. Boral’s trim pieces, including bullnose and cove, are sized in specific millimeter increments, and a 6mm trim from one series won’t seat properly against a 10mm tile from another. The difference is subtle to the eye, but it’s the difference between a grout line that stays put and one that opens up after two seasons. When the original part number is faded or gone, we can often identify the series from a photo and a measurement of the side profile.
For OEM versus aftermarket: Boral’s own replacement trim and tile carries exact batch-matched dimensions and color, which matters if you want an invisible repair. Quality aftermarket equivalents exist for some standard profiles, and we’ll tell you honestly when they’ll work and when they won’t. Our answer is always based on whether the replacement sits flush, wears evenly, and matches the surrounding material, not on markup. For kitchen counter and backsplash adjacent surfaces, we also keep working familiarity with KraftMaid cabinetry, Cambria and Silestone countertops, because a Boral replacement almost always touches one of those.
Styles & brands we work with







Signs Your Boral Kitchen Remodeling Is Failing
- Hairline cracks running across floor tile. This usually means the tile is rated below the floor’s actual traffic load, or the subfloor below it is flexing. In Houston, slab movement from clay soil expansion and contraction accelerates this, especially in Meyerland and Bellaire where the soil shifts more aggressively than in other parts of town.
- Grout crumbling or turning powdery along a backsplash. That’s moisture working into the grout from behind. The Boral tile may be perfectly fine, but if water is getting to the substrate, the grout fails first and it’s a warning sign for what’s happening underneath.
- Boral trim pieces lifting or pulling away from the wall. The adhesive bond is failing, and this is often a humidity-driven problem in Houston kitchens where steam and ventilation collide. Re-gluing without addressing the moisture source means it’ll lift again.
- Chipped edges on countertop-adjacent Boral tile. This is mechanical damage, usually from a pan or dish hitting the edge. Boral tile is durable, but no tile is impact-proof, and a chipped edge invites moisture underneath the glaze, which leads to discoloration and further cracking.
- Discoloration or staining that won’t clean up. If a cleaning product has worn through the tile’s surface seal, stains lock in. Boral glazed tile resists staining well, but older installations or aggressively acidic cleaners can compromise the finish over time.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a Boral kitchen remodeling project in Houston, the installed range is $14,000 – $45,000. A smaller, targeted repair, like replacing a section of Boral backsplash tile or a run of trim, lands on the lower end of that range. A full kitchen remodel that includes new Boral tile flooring, backsplash, trim, and surrounding cabinetry and countertops pushes toward the middle and top. Here’s what moves the number: the square footage of tile, whether the subfloor needs repair or leveling, whether you’re keeping the existing cabinetry or replacing it, and the complexity of the tile pattern. A simple straight-lay backsplash is faster and less expensive than a herringbone with accent inlays. Every quote we give in Houston is a written line-item price, so you know the cost of materials, labor, and any subfloor or substrate work before we pick up a tool. The price we write down is the price on the invoice, period.
| Scope | Houston Installed Range |
|---|---|
| Full kitchen remodel with Boral tile | $14,000 – $45,000 |
| Smaller kitchen refresh (Boral backsplash + trim) | $9,000 – $20,000 |
| Boral tile flooring replacement (kitchen area) | $4,000 – $13,000 |
| Boral backsplash installation | $800 – $2,500 |
| Countertop replacement (Cambria or Silestone) | $2,000 – $6,500 |
Every Boral replacement we install carries our 365-Day Done Right Promise in writing: if the work fails inside a year, we come back and make it right at no charge. No re-inspection fee, no service call fee, no fine print. That’s the Kingswell standard we’ve operated under since 2004.
DIY or Call Us?
You can safely check a few things yourself: run your hand along the tile and trim to find loose pieces, note where grout has crumbled, and take clear photos of any cracking you see. That’s useful. The DIY line ends where the tile saw starts. Cutting Boral tile to match an existing pattern without the right blade and a steady hand produces chips, uneven grout lines, and tile that fails again in months. The adhesive removal is also more involved than most people expect, and scraping a wall or floor too hard damages the substrate behind it, doubling the repair cost. If the tile is in a load-bearing area or next to a sink where water is present, a bad seal creates mold you can’t see until it’s a bigger problem. Trevor Nash has pulled apart enough “quick weekend fixes” in Houston to say this plainly: if you’re not certain, don’t. Call us at (254) 527-5340 and we’ll walk you through what you’re looking at, free, before anyone commits to anything.
FAQs

Properly installed Boral kitchen tile in Houston typically lasts 20 to 30 years, but Houston’s humidity and clay soil movement can shorten that to 10 to 15 years if the subfloor wasn’t prepared correctly or the wrong tile class was used. The tile itself rarely fails first, it’s what’s underneath that decides lifespan. Call (254) 527-5340 if you want an honest read on yours.
A hairline crack can sometimes be filled and sealed for a temporary fix, but on a kitchen floor or backsplash, a cracked Boral tile is almost always better replaced than patched, because the patch will eventually discolor and the crack can continue to spread. Replacement is more reliable, and we’ll tell you straight if a repair is actually viable. Call (254) 527-5340 for an exact assessment.
A small Boral backsplash repair or trim replacement in Houston usually takes one day, while a full kitchen tile floor replacement typically takes three to five days depending on the square footage and any subfloor work. We’ll give you a real arrival window and a completion date in writing before the job starts. Call (254) 527-5340 to schedule your free estimate.
We keep common Boral trim profiles, bullnose, cove, and standard field tile sizes on our trucks for Houston-area jobs, and anything uncommon can usually be sourced within a few days from our regional suppliers. If you send us a photo of what you’re matching, we’ll tell you before we arrive whether it’s a same-day fix or a short lead time. Call (254) 527-5340 and we’ll check availability while you’re on the phone.
Give me the straight story on what you need, and I’ll give you the straight number on what it costs. That’s how Trevor Nash and the whole Penhallow Remodeling Houston crew operate, on every job from a single cracked tile to a full kitchen rebuild. A live person answers our phone 24/7, so when you call (254) 527-5340, you’ll talk to a human being who can help you right then. Your estimate is free, and the price we put in writing is the price you’ll pay.
Written by Trevor Nash, Owner, Penhallow Remodeling Houston at Penhallow Remodeling Houston, serving Houston and nearby areas.


