Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Kitchen Remodeling: The Houston Owner’s Guide
If your Jerith kitchen setup has a failed part, we can match it, price it honestly, and install it without the runaround. Installed kitchen remodeling work in Houston typically runs $14,000 – $45,000 depending on cabinet line, countertop material, and how much of the existing layout changes. Most homeowners discover a problem the hard way: a drawer front that no longer sits flush, a hinge that’s gone soft, or a corner cabinet that’s pulled away from the wall after a few humid Houston summers.
We’re an independent Houston remodeling contractor, not a Jerith dealer. That means we don’t push you toward one brand’s catalog. We match what’s failing to what actually fits, quote you a written number before we start, and stand behind the work with our 365-Day Done Right Promise. If the part fails inside that year, we come back and fix it at no charge. That’s in writing.
Which Jerith Models This Applies To
Jerith’s kitchen remodeling components span multiple cabinet and hardware lines, and not every part crosses over cleanly between series. The gotcha we see most often in Houston kitchens: a hinge or drawer slide that looks identical to the one at a big-box store but isn’t. Jerith hardware is frequently sized in 35mm or 45mm full-overlay configurations, and the mounting plate depth matters more than the finish. Before you buy a part, check the stamp inside the drawer box or on the hinge cup: that number is what we need to match it correctly.
OEM Jerith parts give you exact fit and the original spec. Quality aftermarket equivalents can save 30 – 50% on hardware and soft-close mechanisms, and we’re glad to walk you through which ones we’d trust in a Houston kitchen where humidity never really lets up. For things like drawer glides, pulls, and hinges, a well-sourced aftermarket part often outperforms the original. For structural pieces like cabinet boxes and face frames, we recommend staying with OEM or having a custom piece milled. We also stock parts for KraftMaid, Cambria, and Silestone kitchens, so if your remodel mixes brands, we can handle the whole repair.
Styles & brands we work with
Signs Your Jerith Kitchen Remodeling Is Failing
- Drawer fronts sit crooked or rub against the frame. Usually a worn glide or a hinge plate that’s loosened over thousands of open-and-close cycles. The humidity swings in Houston make the wood expand and contract, which slowly works screws loose.
- Soft-close no longer catches. The internal damper in the hinge or slide has worn out. It’s a small part, but once one goes, the others are usually close behind.
- Cabinet doors won’t stay flush at the top or bottom. This often points to a hinge cup that’s stripped or a face frame that’s shifted, especially in older Jerith installations where the original hardware wasn’t rated for this level of moisture.
- Countertop seams are pulling apart or the laminate is lifting. Houston’s heat and humidity can separate joints that were marginal to begin with. Once water finds its way in, the substrate (the moisture-resistant layer under the surface) swells and makes the problem worse.
- Island or peninsula cabinets feel spongy underfoot or when you lean on them. That’s a base or toe-kick issue, sometimes compounded by the soil movement common in areas like Meyerland, where foundation shifts can transfer stress into cabinet runs. We know that soil, and we know what it does to a kitchen over time.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Houston, a full Jerith kitchen remodel starts around $14,000 for a smaller footprint and climbs to $45,000 for a larger kitchen with upgraded cabinetry, stone counters, and islands. If you’re replacing a single cabinet run, expect $4,000 – $13,000 for cabinet installation. Countertop swaps run $2,000 – $6,500, backsplash work $800 – $2,500, and a kitchen island $3,000 – $10,000 installed.
What moves the number: cabinet line (stock versus semi-custom), countertop material, whether the layout changes, and how much plumbing or electrical has to shift. Our price includes the part, labor, haul-away of the old materials, and a written workmanship warranty. We install Cambria, Silestone, and Caesarstone quartz, and those carry their own manufacturer warranties alongside ours. No verbal ballpark, no change orders that show up after demo day. The number we write down before we start is the number on your invoice.
DIY or Call Us?
Some things you can safely check on your own: is a hinge screw simply loose? Is a drawer glide clogged with ten years of crumbs and cooking oil? Tighten what’s loose, clean what’s gummed up, and see if the part behaves. If it doesn’t, call us. Where DIY goes wrong is when an owner forces a warped drawer back into place or re-hangs a heavy door with the wrong hinge plate. That’s how cabinets crack, and a cracked face frame is a much bigger job than a worn glide.
Swapping a soft-close hinge is straightforward. Rebuilding a cabinet box that’s pulled away from the wall is not, and in a Houston kitchen where humidity is always in the equation, the wrong repair will show itself again in a season or two. Call (254) 527-5340 and tell us what you’re seeing. We’ll give you a straight answer about whether it’s a small fix or a bigger job, and it costs nothing to find out.
FAQs
In Houston’s climate, a professionally installed Jerith kitchen remodel typically lasts 15 – 25 years, though hardware like hinges and drawer glides usually need replacing or adjusting at the 5 – 10 year mark because of the humidity. The cabinets themselves can hold up much longer than the moving parts.
Yes, in many cases. Hinges can be remounted, drawer glides can be swapped, and face frames can be clamped and reinforced. If the substrate underneath a countertop has soaked up water, repair usually isn’t practical and replacement is the honest call. We’ll tell you which one applies to your kitchen before we quote a dollar figure.
A single drawer glide or hinge set can be done in under an hour on the first visit. Cabinet box repairs or a countertop swap typically run one to three days depending on the scope. We give you a defined arrival window before we show up, and a clean job site when we leave.
We keep common Jerith-size hinges, glides, soft-close mechanisms, and cabinet hardware in stock and on the truck, and we can source OEM or quality aftermarket parts for most models within a few days. If your kitchen also uses KraftMaid, Cambria, or Silestone components, we stock and source those too.
Call (254) 527-5340 for a free estimate. Give me the straight story on what you need, and I’ll give you the straight number on what it costs. A live person answers, a uniformed and background-checked technician shows up in the window we gave you, and the price is in writing before the first tool comes out.
Written by Trevor Nash, Owner, Penhallow Remodeling Houston at Penhallow Remodeling Houston, serving Houston and nearby areas.
