Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Houston Homeowners Choose Jerith Construction
Penhallow Remodeling Houston provides independent Jerith repair in Houston, including fencing service, installation, and maintenance across the Houston area, from Meyerland to Kingwood to Spring Branch. We work on Jerith Estate, Majestic, Continental, and Professional fence lines every month, and we know how Gulf Coast humidity, expansive clay soil, and sprinkler mineral deposits affect these specific aluminum and steel profiles. We are not an authorized Jerith dealer or warranty provider, but that independence means we can be straight with you about when a section is worth saving and when replacement makes more sense. If you have a Jerith fence that is leaning, sagging, or showing finish damage, call (254) 527-5340 and we will give you a written price before any work starts.
Why Trust Penhallow Remodeling Houston for Your Jerith Construction?
Jerith aluminum and steel fencing is built to a different profile than the box-store panels most Houston fence crews see. The extrusions are tighter, the factory welds are cleaner, and the powder coat is heavier. That also means the failure modes are different. A fence crew that only knows cedar pickets and chain link will misdiagnose a Jerith gate that sags because the hinge screws have stripped out of thin aluminum channel, or a post that leans because the original footing was poured too shallow for Houston clay. Our crews have been servicing Jerith fence lines in Houston long enough to know exactly what we are looking at when we walk the line, including Katy Jerith service calls.
Trevor Nash, owner of Penhallow Remodeling Houston, studied construction technology at Los Angeles Trade-Technical College and spent years swinging a hammer before he ever sat across from a homeowner with a written estimate. He has been serving Houston long enough to know the soil conditions near the Meyerland area and why they matter before you pour a single footing. That matters for Jerith work specifically, because the number one cause of Jerith post failure in Houston is not the aluminum. It is the footing underneath it.
Every Jerith job we take gets the same treatment as a full kitchen remodel: a written price up front, a real arrival window, background-checked uniformed technicians on site, and our 365-Day Done Right Promise in writing. If the work fails inside the guarantee period, we come back and fix it at no charge. That is The Kingswell Way, and it has been since 2004.
Styles & brands we work with
Common Jerith Construction Problems We Fix in Houston
- Post wobble and lean from shallow footings in expansive clay. Houston sits on gumbo clay that swells when it rains and shrinks when it dries. Jerith posts set in a 12-inch concrete plug will move within a few seasons. We see this constantly on Jerith Estate and Majestic installations done by landscapers who treated aluminum like wood. The fix is a 24-inch deep footing with drainage gravel at the base, and we pull permits when the job requires it.
- Gate sag from stripped hinge screws in thin aluminum posts. Jerith gate frames are sturdy, but the extruded post channel is not thick enough to hold a standard wood screw under repeated gate swings. The screws wallow out, the gate drops, and the latch stops catching. We replace stripped hardware with genuine Jerith hinges sized for the post wall, and we reinforce the channel with a backer plate when the profile allows it.
- Rust bleeding at factory-welded joints after the powder coat gets scratched. Jerith steel lines like Continental are factory-welded and powder-coated, but a single scratch from a weed trimmer or a mower pass exposes bare steel. In Houston humidity, that spot will rust and bleed orange streaking down the panel face. We strip the affected area, treat the corrosion, and re-coat with a matched finish rather than painting over active rust, which is a temporary band-aid.
- White oxidation haze on dark bronze finishes from sprinkler mineral deposits. Houston tap water is hard. When sprinklers hit a dark bronze Jerith fence and the water evaporates, it leaves calcium and mineral deposits that etch into the powder coat over time. The finish goes chalky and hazy. We clean with a pH-balanced aluminum-safe cleaner and reseal the affected panels. This is maintenance, not a structural failure, and we will tell you the difference honestly.
- Cracked or corroded post bases at grade level. Water pools where the post meets the concrete, and over years the combination of standing moisture and fertilizer runoff corrodes the base of the post. Once the extrusion is cracked through, patching does not hold. Jerith’s extruded profiles are not built to take stress-repair at the base, so we recommend partial section replacement with new posts and factory-matched sections. It is usually cheaper in the long run than chasing cracks season after season.
Jerith Parts & Our Repair-vs-Replace Approach
We stock genuine Jerith replacement hinges, latches, post caps, and gate hardware for the Estate, Majestic, Continental, and Professional lines. When structural integrity is on the line, such as a gate hinge or a load-bearing post connection, OEM Jerith parts are the right call. The factory tolerances match the profile, and the finish matches the original powder coat. We do not cut that corner.
For non-structural items like decorative post caps or cosmetic trim, we are not tied to factory-only parts. If a client needs a faster turnaround and a quality aftermarket part matches the profile and finish, we will tell you that option and put it in writing. What we will not do is patch a corroded post base or a cracked rail and call it fixed. Jerith sections are extruded aluminum, not welded angle iron. When the structural section is compromised, partial replacement is the honest repair. A patched Jerith post in Houston clay will fail again, usually within a year.
Call (254) 527-5340 if you are not sure whether your Jerith fence needs a repair or a replacement section. We will look at it and give you a written answer, not a guess.
Our Jerith Service Process – Step by Step
Our process follows the same order on every Jerith job, whether it is a single gate hinge or a full fence line install:
- 1
Diagnosis. We walk the entire fence line, not just the spot you pointed at. A leaning Jerith post is often one of several that were set with the same shallow footing. We check gate square, hinge wear, post plumb, and powder coat condition, and we write down what we find.
- 2
Written scope and price. You get a line-item price in writing before any work starts. The number on day one is the number on the invoice. No change orders, no “we found something else.”
- 3
Repair or install. For post resets, we pour 24-inch deep concrete footings with drainage, set the post to plumb, and reattach the original sections where they are sound. For gate repairs, we replace hinge hardware with OEM Jerith parts. For new installations, we set every post to the same depth and check every gate before we leave.
- 4
Testing and cleanup. We swing every gate, check every latch, and run water over the base of each post to confirm drainage. We leave the job site cleaner than we found it. That is part of The Kingswell Way, not an extra charge.
- 5
Warranty and follow-up. Every Jerith service carries our 365-Day Done Right Promise in writing. If a reset post shifts or a gate hinge fails inside that year, we return and fix it at no charge, no service call fee, no re-inspection fee.
See the difference
Before
After
Before
After
Before
AfterJerith Products We Service & Install in Houston
We service and install all four main Jerith product lines. The Jerith Estate Aluminum Fencing line is the most common we see in Houston subdivisions, often in black or dark bronze with decorative spear tops. The Majestic Aluminum Fencing line runs a heavier extrusion and is common around pools and elevated backyards where wind load matters. The Continental Steel Fencing line is heavier gauge and shows up on corner lots and commercial edges; it is also the line most prone to rust bleed at welded joints if the powder coat is nicked. The Professional Aluminum Fencing line is seen less often in residential Houston but crosses our path on mixed-use and HOA perimeter work. We keep common OEM gate hinges, latches, post caps, and touch-up coatings in the truck stock for fast same-week service, and we order factory-matched sections for partial replacements when needed.
We Also Service These Brands
Jerith is not the only brand we work with. Penhallow Remodeling Houston is a full-service General Contractor, and our crews also install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures on kitchens and baths across Houston. That broader trade depth means when we reset a Jerith fence post next to your patio, we understand how the grade, drainage, and hardscape around it all tie together. Give me the straight story on what you need, and I’ll give you the straight number on what it costs.
FAQs – Jerith Construction Service in Houston
Yes, in most cases. If the post itself is not cracked or corroded through at the base, we can pull it, pour a new 24-inch deep footing with proper drainage, and reinstall the original post and panels. The sections come off cleanly at the factory brackets in most Jerith lines, especially Estate and Majestic. If the post base is cracked or corroded, we will show you that in person and recommend replacing that post, not the whole section. Call (254) 527-5340 for an exact assessment, free estimates included.
That chalky white or gray haze is mineral deposit etching from Houston’s hard water. Sprinkler spray lands on the dark bronze powder coat, evaporates in the heat, and leaves calcium and magnesium deposits that gradually dull the finish. It is cosmetic, not structural, but it will not wash off with a hose. We clean Jerith finishes with an aluminum-safe pH-balanced cleaner and can adjust sprinkler heads to reduce direct spray on the fence. An annual rinse and occasional reseal keeps it from coming back.
Yes, and this is the single most important thing to get right on a Jerith install in Houston. The standard manufacturer spec assumes reasonable soil, but Houston’s expansive gumbo clay swells and shrinks with every rain-dry cycle. We set Jerith posts in 24-inch deep concrete footings with a gravel drainage base, which is deeper than many fence crews pour. Shallow footings are the primary reason we see Jerith posts leaning in Meyerland, Spring Branch, and Kingwood within a few years of installation, which is why we also handle Jerith Construction in The Woodlands, TX with the same deep-footing standard.
Not reliably. Jerith aluminum sections are extruded profiles, not solid bar, and welding thin extruded aluminum without a controlled shop environment weakens the surrounding material. The weld zone becomes brittle, and the gate will crack again under repeated use. We recommend replacing the damaged gate frame or section. It costs more up front than a weld patch, but it is the repair that actually holds. Call (254) 527-5340 and we will give you a written price for either option so you can decide with numbers in hand.
Penhallow Remodeling Houston is not an authorized Jerith warranty provider, and we do not represent ourselves as one. Jerith’s manufacturer warranty covers defects in materials and finish. Our work carries its own written guarantee: the 365-Day Done Right Promise. If our repair or installation fails inside that year, we return and fix it at no charge, with no service call fee. If you have a manufacturer warranty claim on a defective Jerith section, we can document the condition of the fence and help you file it with the manufacturer, but the manufacturer’s warranty process is separate from our labor guarantee.
Jerith aluminum fence repair, such as a post reset or hinge replacement, typically runs $400 to $1,800 depending on how many posts are involved and whether we need to order factory-matched sections. Full Jerith aluminum fence installation in Houston generally runs $3,500 to $9,000 for a typical residential run. Here is the breakdown:
| Jerith Service | Typical Houston Price Range |
|---|---|
| Jerith aluminum fence repair (post reset, hinge replacement) | $400 – $1,800 |
| Full Jerith aluminum fence installation (labor, per typical residential run) | $3,500 – $9,000 |
Every Jerith job gets a written line-item price before we start, so the number you sign is the number you pay. Call (254) 527-5340 to schedule a free estimate.
Book Your Jerith Service in Houston, TX
If your Jerith fence is leaning, sagging, chalking, or rusting, call us at (254) 527-5340. We will schedule a walk-through, put the diagnosis and the price in writing, and give you the 365-Day Done Right Promise on the work. A real person answers the phone, and estimates are free.
Written by Trevor Nash, Owner at Penhallow Remodeling Houston, serving Houston since long before the clay taught us anything worth knowing.
