Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Driveway & Pavers: The Houston Owner’s Guide
We stock and install Mr-Glass-compatible driveway and paver components throughout Houston at $700 – $18,000 installed, depending on whether you’re replacing a single cracked paver or an entire driveway. Most single-part replacements run $250 – $700 including labor, and we carry the common Mr-Glass paver profiles on our trucks so the fix usually happens same day. The way most Houston homeowners discover a failing Mr-Glass paver is subtle at first: a hairline crack that widens after a hard rain, a paver that rocks underfoot near the garage apron, or a section that has settled a half-inch below the surrounding surface after our clay soil got wet and dry a few dozen times.
Which Mr-Glass Models This Applies To
Mr-Glass manufactures driveway pavers in two primary profiles: the 60mm residential series and the 80mm commercial series. The 60mm version shows up most often on Houston driveways built after 2010, while the 80mm appears on heavier-traffic applications like shared driveway entrances or areas where owners park trucks and RVs. Here’s the compatibility gotcha that trips people up: the locking tabs are not interchangeable between the two series. A 60mm paver will not seat properly against an 80mm neighbor, and forcing it just creates a raised edge that catches tires. Check the underside of any intact paver for the stamped series code (M-G60 or M-G80) before ordering replacements. For OEM parts, Mr-Glass pavers are color-matched by batch, and batches drift slightly over time, so if your driveway is more than five years old, a quality aftermarket match in the same color family often blends better than a brand-new OEM piece.
Styles & brands we work with
Signs Your Mr-Glass Driveway & Pavers Is Failing
- A single paver rocks or tips when you step on it. That’s almost always a bedding-sand washout beneath the paver, usually from a downspout discharging too close to the driveway edge. Left alone, the rocking motion cracks the paver’s edges within a season or two.
- Cracks running across multiple pavers in a line. This points to a sub-base failure underneath, not a paver defect. Houston’s clay soil expands and contracts hard, and if the gravel base wasn’t compacted in lifts, the pavers span those soft spots and crack under vehicle weight.
- Color fading that’s patchy rather than even. Uneven fading usually means water is ponding in some areas and draining fast in others. The faded zones are the ones holding moisture against the paver surface through every Houston summer afternoon.
- Fine sand or grit washing onto the driveway after rain. This is your polymeric joint sand failing. When the joints go empty, pavers start shifting laterally and edges begin chipping against each other.
- A low spot that holds a puddle 48 hours after rain. That’s settlement, plain and simple. It only gets worse, and every vehicle crossing that dip accelerates the wear on the pavers around its edges.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Houston, replacing a small section of Mr-Glass pavers (say 20 to 40 square feet with fresh bedding sand and joint sand) typically runs $700 – $2,500 depending on access and whether the sub-base needs re-compaction. A full Mr-Glass paver driveway installation in Houston runs $7,000 – $18,000, with the spread driven mostly by square footage, paver thickness, and whether we’re pulling up and rebuilding the base or laying fresh over compacted ground. Every quote we write includes the pavers, bedding sand, joint sand, labor, and haul-away of the old material, and the number we hand you before work starts is the number on the invoice. If the repair fails inside a year, we come back and fix it at no charge under our 365-Day Done Right Promise. That’s covered in writing, not in a handshake.
DIY or Call Us?
You can safely pull a weeded joint and check the underside stamp on a loose paver, and you can sweep or gently rinse the surface. What you shouldn’t do is dig out a settled section and guess at re-bedding it: if the base beneath isn’t leveled and tamped right, the new pavers will sit high, rock, and crack within a few months. We have seen a handful of Houston driveways where a well-meaning weekend patch job left the repair a full inch above the original grade, and every one of those needed a full reset. The tools and the trained eye matter. If you’re near Meyerland or anywhere in Houston with heavy clay soil, the settlement pattern under an existing driveway is usually more involved than just the visible pavers. Call (254) 527-5340 for a free estimate, and we’ll tell you straight what’s failing and what it costs to put it right.
FAQs
Mr-Glass pavers typically last 20 to 30 years in Houston when the base was compacted correctly and the joints stay filled, though surface color may fade in direct Texas sun after 8 to 12 years. The pavers themselves rarely wear out; the sand and sub-base are what fail first. Call (254) 527-5340 and we’ll tell you whether your base is still doing its job or whether the replacement is a surface repair.
Hairline cracks can often be stabilized by re-leveling the paver and refreshing the joint sand, but a crack that runs through the full thickness means the paver has lost its structural integrity and should be replaced. Patching product alone won’t stop a cracked paver from splitting further under vehicle weight. If you send us a photo, we’ll tell you honestly which category yours falls into, and a replacement is usually more affordable than people expect.
A small section replacement (20 to 40 square feet) usually takes one day, including removing the old pavers, re-compacting the bedding, laying the new pieces, and sweeping in joint sand. A full driveway replacement can take three to five days depending on square footage and access. We’ll give you a written timeline with your estimate, and we show up in the window we gave.
We stock the most common Mr-Glass residential profiles and popular Houston color blends on our trucks, so many single-paver and small-section repairs are done same-day. If you have a less common color batch, we source the closest match and have it on your site within a few days. We also stock compatible parts for KraftMaid, Cambria, and Silestone product lines for our other service categories. Call (254) 527-5340 with the series code from the underside of your paver and we’ll confirm availability before we roll a truck.
Written by Trevor Nash, Owner, Penhallow Remodeling Houston at Penhallow Remodeling Houston, serving Houston and nearby areas.
